Captiva Designs Large Offset Smoker (941 sq in)
The only one that prints its steel — 1.2 mm — A barrel offset with 551 square inches of primary grate whose listing does what no other maker here does: it prints the steel — 1.2 mm on the body, 3 mm on the lids. 4.4★ on 377, but that base is shared with two other smokers.
The listing's size menu spans 3 models: Medium Offset Smoker, Large Offset Smoker, Large Vertical Smoker — this page is the Large Offset Smoker. Check the size before you add to cart.
Contender in the Lightweight division — The Best Offset Smokers Under $700 (2026): The Longhorn's Steel, the Highland Oklahoma Joe's Re-Made, and the Smokin' Pro AmazingRibs Begs You to Skip
Sold and shipped by PHI VILLA · 30-day refund/replacement · read 2026-10-09
Specs
| Primary grate | 551 sq in |
| Total area | 941 sq in (551 grate + 198 warming rack + 192 firebox grate) |
| Weight | 117 lb by the listing text; 123 lb in its detail table |
| Steel per sq in | 0.21 lb (117 lb ÷ 551 sq in) |
| Steel thickness | 1.2 mm body, 3 mm lids (the listing) |
| Design | Traditional offset; "integrated" one-piece cook chamber (the listing) |
| Warranty | Not published — no warranty document on any Captiva Designs site we could reach; sold only through Amazon |
| Owner rating | 4.4★ / 377 |
Pros
- The only smoker we read whose maker prints a steel thickness: "the body steel thickness reaches 1.2mm, and the lids even reaches 3mm"
- 551 square inches of primary grate, a little less than the Highland's 616
- Ships with charcoal grates for the main chamber, so it doubles as a charcoal grill
Cons
- 1.2 mm is about 18 gauge — thin for an offset, and the number explains its tail: the lid gaps, leaks and heat that is hard to hold that owners of this size report
- Its 4.4 stars are shared with a smaller Medium offset and a Large Vertical smoker on the same listing — one count and one histogram for three different smokers
- Sold by a third-party seller, PHI VILLA Holding Co., at 75% positive feedback, not by Amazon
- No warranty document anywhere we could find: captivadesigns.com does not resolve, phivilla.com is a parked page, and captivadesignsus.com is a content site that links to Amazon
- The same 941-square-inch smoker is also sold as a Sophia & William, by a different seller
Leaks and thin metal on the Large offset. "Had to buy fire box gasket to seal off the lid. It is so out of spec the lid has maybe an 1/8 inch gap on the curves"; "Very small. Leaks. Not a seal anywhere"; "The material is very thin"; "The door doesn't have a good seal so it doesn't hold the temperature"; "It's really hard to hold heat up. The flow of air is not there"; and a defective wheel axle still awaited.
10 percent of 377 owner ratings (pooled across three sizes) are one or two stars as of 2026-10-09; all 8 critical written reviews for the Large offset read · critical reviews read 2026-10-09
“The build quality is solid, and I love that I can smoke meats and grill them too.”— Guanyu, Amazon · Verified owner
FAQ
Who is the Captiva Designs Large Offset Smoker (941 sq in) for?
You want an offset that tells you its steel thickness before you buy it, and 1.2 mm on the body with 3 mm lids is a trade you will take for a one-piece cook chamber.
What do owners say about the Captiva Designs Large Offset Smoker (941 sq in)?
4.4★ across 377 owner ratings (Amazon, read 2026-10-09 · listing-wide base). What owners complain about: Leaks and thin metal on the Large offset. "Had to buy fire box gasket to seal off the lid. It is so out of spec the lid has maybe an 1/8 inch gap on the curves"; "Very small. Leaks. Not a seal anywhere"; "The material is very thin"; "The door doesn't have a good seal so it doesn't hold the temperature"; "It's really hard to hold heat up. The flow of air is not there"; and a defective wheel axle still awaited.
Who sells the Captiva Designs Large Offset Smoker (941 sq in) on Amazon, and can it be returned?
Sold and shipped by PHI VILLA, when we read the listing on 2026-10-09. Amazon's returns line read: 30-day refund/replacement. Sellers and return terms can change, so check both on the listing before you buy.
What is the warranty on the Captiva Designs Large Offset Smoker (941 sq in)?
Captiva Designs publishes no warranty term for the Captiva Designs Large Offset Smoker (941 sq in) — we looked for one from the maker and record the absence rather than guess. Buy it somewhere with a return window you trust.
Does the Captiva Designs Large Offset Smoker (941 sq in) come with a manufacturer warranty?
Captiva Designs publishes no warranty document anywhere we can find, so there is no manufacturer term to hold them to beyond the listing itself and the marketplace's own returns window. Nobody can check what does not exist — that is the finding rather than a gap in our research.
Record
- — Added in the Lightweight offset smoker showdown after a second field pass: the only maker that prints a steel thickness (1.2 mm body, 3 mm lids); rating pooled across three sizes; sold by PHI VILLA.
Warranty — and what changes if you buy it on Amazon
Captiva Designs publishes no warranty term for this product. We looked for one from the maker and record the absence rather than guess.
Captiva Designs publishes no warranty document anywhere we can find. There is no term to hold them to beyond the listing itself and the marketplace’s own returns window. Nobody can check what does not exist — that is the finding, not a gap in our research.
✓ Safety: no active recall — CPSC recall API checked 2026-10-09: RecallTitle=Captiva → 0; RecallTitle=PHI VILLA → 0. No recall covers this smoker.
Size your pool first → ·All pool gear →
Data last verified: 2026-10-09. Ratings are real, dated reads — never scraped or invented. Full methodology and monetization disclosure: how we test.